Problems to be noticed in the operation of combine harvester

First, the preparation before the operation 1. Each operating unit should be equipped with trowels, iron files, wooden tools and other tools in order to eliminate various faults at any time, put them back to their original place. 2. Each working unit should be provided with sufficient and effective fire extinguishing equipment and placed in an easily accessible place. The exhaust pipe of the combine harvester should remove carbon deposits and install the Mars collector. Regularly check the removal of sediments. The exhaust pipe should be too short. 3. The protective cover and cover of the drive chain and transmission belt of the combine harvester shall be complete and reliable. The escalator guardrails, handrails, and pedals of the control console shall be installed securely, and the baffles shall be provided under the control platform railings. 4. The chiller should have sufficient lighting equipment so that it can be found and eliminated in time when operating at night. 5. The crew members should conduct technical training, otherwise they should not participate in the operation. Second, the operation should pay attention to matters 1. The operator should focus on the work, carefully observe the harvester transmission, listening to threshing, separation, cleaning and other parts of the sound, found that abnormal should be immediately removed. 2. It is forbidden to clear the header, conveyor belt and walking system during operation; it is forbidden to push the object by hand or foot to the conveyor belt; do not unload the grain when turning. 3. In the process of transportation, it is better not to use emergency braking and sharp turn. When going uphill and downhill, you should drive at a low speed, and leave enough space for the car.