What should you watch out for when using a new farm machine?
2019-10-14 14:07:36
1. After buying a new camera, before using the engine, first carefully read the instruction manual of the machine. Pay special attention to the basic requirements of the book:
(1) Use fuel of the specified grade, fully precipitate and filter before use, and the oiler should be kept clean.
(2) The lubricating oil should be kept clean, and the amount added must be sufficient, and it should be replaced regularly. The use of the grade should be consistent with the regulations.
(3) The air cleaner should always pay attention to maintenance.
(4) Care should be taken to add cooling water, especially if the engine is not to be operated in a water shortage.
(5) Always pay attention to check and tighten the relevant bolts and nuts, especially the connecting rod bolts, the bolts on the drive shaft, the lock nuts on the flywheel, and the fastening nuts on the wheels.
If the user buys a new camera and really does it in accordance with the above basic requirements, then the life of the camera can be greatly extended.
2. After buying a new machine, do not carry the load operation immediately. It should be run-in according to the instructions. After the running-in is completed, the machine oil filter is cleaned and residual impurities in the engine oil are removed. If necessary, the engine oil must be replaced and the oil pan cleaned.
3. When the new machine is operating, it must be done strictly in accordance with the requirements of the manufacturer's instructions, not overloaded, not over-speeded, not over-fed, and not over-timed.
4. It is not possible to modify the new machine at will and increase the engine speed arbitrarily. In order to make the machine run faster and some users adjust the fuel supply and pressure of the high-pressure pump at random, some people use the iron wire of the governor spring to tie it up. This is even more wrong.
(1) Use fuel of the specified grade, fully precipitate and filter before use, and the oiler should be kept clean.
(2) The lubricating oil should be kept clean, and the amount added must be sufficient, and it should be replaced regularly. The use of the grade should be consistent with the regulations.
(3) The air cleaner should always pay attention to maintenance.
(4) Care should be taken to add cooling water, especially if the engine is not to be operated in a water shortage.
(5) Always pay attention to check and tighten the relevant bolts and nuts, especially the connecting rod bolts, the bolts on the drive shaft, the lock nuts on the flywheel, and the fastening nuts on the wheels.
If the user buys a new camera and really does it in accordance with the above basic requirements, then the life of the camera can be greatly extended.
2. After buying a new machine, do not carry the load operation immediately. It should be run-in according to the instructions. After the running-in is completed, the machine oil filter is cleaned and residual impurities in the engine oil are removed. If necessary, the engine oil must be replaced and the oil pan cleaned.
3. When the new machine is operating, it must be done strictly in accordance with the requirements of the manufacturer's instructions, not overloaded, not over-speeded, not over-fed, and not over-timed.
4. It is not possible to modify the new machine at will and increase the engine speed arbitrarily. In order to make the machine run faster and some users adjust the fuel supply and pressure of the high-pressure pump at random, some people use the iron wire of the governor spring to tie it up. This is even more wrong.
Natural Oxymatrine,Oxymatrine Extract,Cas 16837-52-8,Natural Oxymatrine Extract
Shaanxi The River Pharmaceutical Co., Ltd. , https://www.dahepharma.com