Tillers safe operation precautions
In order to use the tiller better for safe operation and eliminate potential safety hazards of the tiller, special attention is paid to the following safety precautions, so that the majority of agricultural machine owners (hands) can learn by reference to improve safety awareness.
1. Operators are strictly forbidden to work in fatigue, after drinking and at night, and the owner should not lend the tiller to persons who are not familiar with the safe operation method.
2. The operator of the tillage machine must be professionally trained and familiar with operation instructions, and operate in strict accordance with the safe operation method.
3, the operator must pay attention to the safety warning signs on the machine, and carefully read the contents of the logo.
4. The operator should wear clothing that meets the protective function of labor so as not to be entangled with moving parts and cause personal and property safety accidents.
5. Before each operation, it is necessary to check whether the engine and transmission box and other components are full of lubricating oil; whether the bolts of each component are loose or fall off; whether the operating components such as the engine, transmission box, clutch, and brake system are sensitive and effective; whether the gear lever is Put in neutral position; exposed rotating parts have a good protective cover.
6, when the tool is installed, it must be symmetrical, the work blade forward, on a good bolt, bolt and other fixed tools to ensure the safe operation of the tiller.
7. The height of the resistance bar should be adjusted at any time according to the actual conditions of the work to maintain the stable position of the fuselage to prevent the engine from tilting excessively, resulting in poor lubrication of the engine and damage.
8. After the engine is started, it should be run for 5-10 minutes with no load. It is better not to work at high speed and heavy load within 1-2 hours before operation, which can prolong service life. If there is a racing phenomenon when the engine is started, immediately cut off the fuel supply and turn off the engine.
9, in the field of land, ditch, hole, canal and other operations in the low-speed operation; in the greenhouse when operating to ensure good ventilation, air convection, exhaust emissions.
10. It is forbidden to touch, touch and get close to all kinds of rotating parts during operation, and keep away from the high temperature area of ​​the exhaust pipe to prevent accidents.
11. When changing tools, removing weeds, and checking maintenance, it is necessary to turn off the engine and stop it until it stops. In the process of transferring the tiller, it is necessary to ensure safety.
12. When working in a slope area, the slope should be less than 25 degrees and can be operated along the slope direction to ensure a balanced and stable tiller.
13. It is forbidden to adjust the speed and power of the engine, and change the operating speed of the tiller; it is forbidden to change the tiller and the bucket to other uses.
14. Turn off the engine when adding fuel, stop the operation, and avoid the fire source.
CAD CAM Dental Milling Machine
CAD/CAM dental systems refers to the software used to both design and mill dental prosthetics. CAD (Computer Aided Design) includes digitally scanning, while CAM (Computer Aided Manufacturing) is the process of sending final models to the output device and manufacturing them through milling or 3D printing. DGSHAPE devices and software are specifically engineered to perfectly fit into this digital workflow.
Demetdent CAD/CAM Dental Milling Machines were built with you in mind. Built-to-last and designed for the simplified set-up and milling of a wide-range of dental prosthetic materials, make milling more comfortable and convenient for lab technicians. In addition, Demetdent dental milling machines offer industry best warranties and a legendary level of dealer support, customer service and technical support.
Cad Cam Milling,Cad Milling Machine,Cad Cam Dental Machine Price,Dental Cad Cam Cnc Milling Machine
Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com