Method for increasing heating rate of glass reactor

The slow rise of the glass reactor is also a problem that users are confused. What method can be used to increase the heating rate of the glass reactor? Glass reactor manufacturer Keda provides the following three points:

1. All know that “the moon is full, the water is full,” and when filling the solution into the kettle of the glass reactor, don’t top it up. When the solution is first injected, one-half of the capacity of the kettle body is added; when the temperature is raised to the set temperature, the material is added to the kettle body, thereby adding the solution in multiple portions. This is a way to increase the rate of temperature rise in a glass reactor.

2. The kind of insulation cotton special for the glass reactor can be used to pack it tightly, so that the insulation cotton can exert its heat preservation effect, so that the temperature can not be lost too much. This is also a way to increase the rate of temperature rise of the glass reactor.

3.zui The latter method is to increase the heating rate of the glass reactor by shortening the heating time. How to shorten the heating time? The glass reactor is subjected to a higher temperature. The specific method is: appropriately increase the set temperature of the high temperature oil bath, the glass reactor has a specific use temperature, and when it is close, the temperature of the high temperature oil bath is raised. Then drop to the actual temperature used.

The above information is provided by the glass reactor manufacturer