Washing machine operation instructions
How to use the washing machine, precautions for use and maintenance of the washing machine, the following will explain in detail.
First, the washing machine use method
Open the key switch, lightly press the brush pedal, put down the brush tray, put down the squeegee, press the brush tray and the water suction switch, adjust the water volume according to the degree of oil on the ground, adjust the water supply size, press the handle control ring downward (forward) Adjusting the speed adjustment knob of the washing machine, the washing machine can enter the scrubbing work, and pushing the handle control ring upwards, the machine retreats;
After the work is completed, first turn off the brush button, step on the brush pedal, lift the brush tray, and the machine continues to drive forward. When the multi-squeegee of the hand-pushing scrubber absorbs all the water in the area, pick it up. Squeeze the handle, turn off the key switch after turning off the suction motor button, and when all machine functions are stopped.
1. When starting up, turn on the power and then turn on the various switches (total switch, drain switch, water suction switch, brush switch). When the device is not in use, turn off all switches and disconnect the power.
2. When the switch is turned on, the water-absorbent motor switch and the brush-disc switch should not be turned on at the same time. Otherwise, the current is too large and it is easy to break through the circuit board.
3 , under the brush can not put the grinding pad and the like (if you use the grinding pad to replace the brush into a needle seat), otherwise, the resistance is too large, it is easy to burn the circuit board or brush the motor. In addition, it should be noted that no rope, wire, silk or other slender objects can be wrapped under the brush disk. If winding, the equipment should be stopped and cleaned in time. Otherwise, the resistance will be too large and it will break through the circuit board or the motor.
4. Do not pour water into the suction motor port when adding water, otherwise the suction motor may be burnt.
5 , replace the brush plate Do not move the machine, otherwise it may deform the rear water absorption device, affecting the water absorption effect.
6. Do not hit any objects, which will easily damage the front wheels and damage the equipment.
7. The water discharge switch and the main switch on the panel should pay attention to the opening direction, otherwise it will be easy to break.
8. Clean and maintain the machine in time, otherwise it will be stinky.
9 , to arrange the use of special personnel, the use of personnel to be trained, other unrelated personnel are not allowed to operate the machine.
10 , in time to clean up the dirt, suction pipe and other components, keep the pipeline unblocked, otherwise it is easy to burn the water-absorbing motor.
Third, the maintenance of the washing machine
1 , draining sewage
2 , use clean water to clean the sewage tank, sewage tank mouth
3 , clean the outside of the equipment, wipe the machine
4. Check if the fan filter is clean. If necessary, please clean it.
5. Check the pressure of the squeegee on the ground. If necessary, please change or replace it.
6 , check whether the brush is intact
"The Washing Machine Instructions for Use" is provided by Shanghai Bashu. Shanghai Bashu is a professional supplier of washing machines. It has been selling scrubbers for many years and can provide you with the best price for washing machines. To purchase, check our special offer washing machine products, please enter: http://http://
Hand Liquid Soap,Hand Soap,Hand Sanitizer Gel,Aloe Hand Soap
Wuxi Keni Daily Cosmetics Co.,Ltd , https://www.wxkenidaily.com