Walking transplanter operation steps
Operation sequence
Engine start check to check if gasoline or oil is added. Is the fuel swirl valve in the "ON" position? Whether the throttle is pulled in the maximum position. Does the throttle handle have a 1/2 position? Pull the recoil starter and push the throttle handle to the original position after starting. The rice transplanter drives into the rice field and pulls the hydraulic operating handle down to raise the body. Turn the shift lever to the “Plug†position and close the main clutch into the paddy field.
Replenishing seedlings
When the seedling box extension plate is used to replenish the seedlings, the seedlings extend beyond the seedling box to prevent the seedlings from bending backward. When taking the seedlings, lift the seedlings on one side of the seedling tray and insert the seedlings. When there is no seedling on the box, be sure to move the seedling box to the left or right side and replenish the seedlings. The seedlings should be replenished before the seedlings are replenished. If it is replenished when it exceeds the replenishment position, the number of plants will be reduced. When replenishing the seedlings, pay attention to the alignment of the remaining seedlings and the supply of the seedlings.
Turn to line break
When the rice transplanter is in the field, after each straight line of transplanting operation, press the following method to turn the line: First, turn the transplant clutch to the “off†position, reduce the engine speed, and turn the hydraulic operating handle to the “up†position. The body is lifted; the second is to lift the handle up slightly, rotate one side of the clutch and twist the body at the same time, pay attention to make the floating plate gently rotate without pressing the topsoil. Do not forget to turn back and stretch the marker in time.
How to use the marker
Use a marker to keep the insertion straight. Use it by: Check that the transplant clutch handle and the hydraulic operating handle are in the “connected†and “down†positions, respectively. Swing the marker bar on the side of the next insertion, so that the marker extends and the insertion is inserted on the topsoil. The line drawn by the marker is the center of the body on the side of the next insertion, and the middle indicator is aligned with the line drawn by the marker when the insertion is performed.
How to use the side line marker
A side aligner is used in order to maintain a uniform line spacing. When inserting the rice, align the side aligner on the front side of the side floating plate with the inserted seedling row and adjust the line spacing.
Things to be confirmed before transplanting
First, figure out the shape of the rice paddy and determine the direction of the transplanting. Second, the first four lines are the basis for inserting a line. Special attention should be paid to the operation to ensure linearity. Third, before the start of the transplanting operation, check the following items: whether the shift lever is dialed to the “plug†speed gear; whether the pitch of the plant is hooked up; whether the hydraulic operating handle is turned to the “down†position; whether the handle of the plug clutch is dialed to “ In the position of the connection, the throttle handle is slowly swung inward, and the rice transplanter moves forward while inserting it.
The safety clutch is a protection against overloading the implant arm. If the insertion arm stops and makes a “beep†or “beep†sound, the safety clutch is in motion. At this time, the following measures should be taken: quickly cut off the clutch handle; then extinguish the engine; check whether there is a stone between the seedling and the needle, between the planting arm and the floating plate, if it is necessary to remove it in time; if the needle is deformed, it should be checked Or replace it. By pulling the recoil starter, confirm whether the needle rotates freely, and then start the seedlings that have not been inserted in the lateral movement of the seedling box.
Orthopedic Instruments,Arthroscopy Electric Drill,Arthroscopy Forceps,Endoscopic Surgical System
ZHEJIANG SHENDASIAO MEDICAL INSTRUMENT CO.,LTD. , https://www.sdsmedtools.com