Process of the bottle unscrambler
Process principle
1, station bottle rate: ≥ 99%, bottle mechanism bottle process bottle loss rate: ≤ 3%, for the bottle washing machine to meet the sanitary requirements of qualified bottles.
2, the bottle method: the method of dry bottle after pouring the bottle into the soaking pool. Empty bottles (bags, plastic boxes, cartons, etc.) in various packaging forms are randomly poured into the water, and the bottles that are floating in the water are flushed to the dispensing device through the rinsing device, and the broken bottles and debris are sunk. The water falls onto the slag removing device and is removed, and the bottle is sent to the arranging device through the dispensing device to move the bottle in the same direction as the chain under the action of the chain with the speed difference, and then the bottle bottom is unified toward the front by the tumbling device. After the bottle-discharging device is arranged in a centralized manner to the bottle-stop device, the Zui bottle enters the vertical bottle device to complete the entire bottle-receiving process.
3, using online bottle-receiving method, installed in the upper bottle area outside the packaging workshop, after differently packed bottle bottles, directly enter the bottle conveyor chain before the bottle unloading machine, reduce manual packing, loading boxes, unloading boxes And other processes to save on transshipment costs.
4, the bottle machine water can be used to wash the bottle pre-soaking tank overflow water through the drainage filter device to overflow the water in the water tank to the drainage filter belt, the standard paper and debris left on the mesh belt discharged to the outside of the equipment The water flows into the sump, and after being filtered by the mechanical ear type multi-layer filter plate, the pump provides a power source, and the filtered water is driven into the surf device by the power pump to realize recycling, and the filter plate can be taken out at any time. To achieve the purpose of removing foreign objects. The water that removes the label paper or impurities can be recycled. The water that the beer bottle is dumped during the traveling process is collected in the water tank at the bottom of the rear part of the equipment, and is pressurized by the pipeline pump to form the convection before and after the water flow, saving resources and ensuring the workshop. Internal hygiene and cleanliness.
5, production convergence
- According to the operating speed of the bottle unscrambler, adjust according to the bottle source condition.
- Before production, you must know the bottle source, quantity and cleanness of the bottle.
- After the bottle is in normal condition, notify the bottler to prepare for bottle washing.
- Adjust the running speed in time when an abnormal situation occurs in the subsequent process
6, the basic operating procedures
- Turn on the machine, turn on the main unit to start the power supply, and let the bottle unscrambler idling for 2 minutes before starting the machine. Check whether the mechanical transmission parts are working properly, whether to add lubricating oil, and add lubricant to the bottle chain.
- Turn on the circulation pump and check if the pressure meets the requirements.
- Check if the slag net is normal, check the pipeline for leaks and water leakage.
- The operator's continuous inspection is performed according to the 2.2 process parameters.
- Before entering the bottle, check whether the spray is smooth. The bottle processor can meet the process requirements before entering the bottle. The bottle rate is ≥99%. The bottle loss rate of the bottle mechanism is ≤3%, so as not to reduce the bottle production.
- During the operation, the operator will clean the broken bottles, glass slag and other debris in time; check whether the spray pipe is unblocked every half an hour, and whether the nozzle pressure is up to standard, to ensure the effect of the bottle.
- During operation, the vehicle speed is controlled at the set speed (package V-match map).
- Each class of continuity checks the slag removal net, cleans it up in time, and cleans up the bottle residue, label paper and other debris around the bottle unscrupulous machine from time to time to ensure the equipment is clean and hygienic.
- During the production process, check the water level of the water tank of the bottle unscrambler at any time, replenish the water source in time, and the excess part enters the workshop to recover the pool.
It is used for general isolation in outpatient clinics, wards, and laboratories of medical institutions; it plays a protective role during inspection and treatment in medical institutions, and blocks body fluids, blood splashes or splashes of national essential medicines For general isolation in the room, etc.; medical institutions play a protective role during inspection and treatment, blocking bodily fluids, blood splashes or splashes. The main components are usually composed of protective cover, foam strips and fixtures made of polymer materials. Mechanism of action [Material] overall food-grade flexible PVC silicone material; rigid polycarbonate PC explosion-proof lens
[Product Features]Surface wide field of view ≥270°; 8 concealed air vents; adjustable elastic fixing straps; light transmittance ≥90%; myopia glasses can be worn inside; anti-fog layer; eye-face fit, closed good sex
[Scope of application] It is used for general isolation in outpatient clinics, wards, and testing rooms of medical institutions; it plays a protective role during inspection and treatment in medical institutions, blocking body fluids, blood splashes or splashes. How to use This product is for one-time use. After use, it should be destroyed in the sales package.
Medical Goggles,Medical Isolation Goggles,Medical Eye Goggles,Medical Grade Goggles
Jilin Sinoscience Technology Co. LTD , https://www.contoryinstruments.com