How to manage strawberry ventilation?

ask:

How do I manage the ventilation of strawberries?

The temperature and humidity management of strawberry in facility cultivation is the focus of winter season strawberry cultivation management. Many people think that strawberry temperature and humidity management is simply based on strawberry temperature and humidity requirements, and can be controlled by opening and closing air vents in a timely manner. In actual production, many air release management operations are not scientific and reasonable. Based on my more than ten years of experience in facility cultivation, I will talk about some small tips and details in air release management, hoping to help the growers.

1. Correct air release operation:

Many people may disagree when it comes to air release operation, think it is not as simple as opening the air vent. In fact, it is also very skillful to release air. If the air outlet is operated by a film rolling machine, the problem is relatively small, but many greenhouses are manually ventilated. Here I mainly talk about the correct ventilation operation by manual operation:

1. The opening and closing width must be consistent. Do not open the air vents, and the width of the closure is not the same, it is easy to cause uneven temperature in the facility, especially to avoid the pit-type ventilation.

2. To open the air vents when the greenhouse is cooled down, the air vents should be lowered first, and then the air vents should be closed; after the temperature is lowered, the air vents should be closed, and the air vents should be raised first and then the rear air vents. To open the air vent for the purpose of dehumidification, the top air vent should be opened first and the back air vent should be opened. After the air exhaust is closed, the air vent should be opened first and then the top air vent.

The greenhouse is cooled and dehumidified, and the air vents are opened and closed at the same time.

Second, precautions for sunny air release operation:

On sunny days, due to the good light and the greenhouse effect of the facility, the temperature difference between indoor and outdoor is large, especially in winter and winter. The temperature difference between the inside and the outside can reach more than 20 ° C. At this time, the air release is mainly based on cooling and dehumidification. Please pay attention to adjusting the size of the air vent according to the temperature in the facility at any time. Do not open the air vent once in order to do other management operations indoors. This way, the temperature in the facility drops sharply, which is not conducive to the growth of seedlings and flowers . It is advisable to open and close the air vents little by little at a time to keep the temperature in the facility relatively stable.

Three, precautions for continuous ventilation in rainy days:

Most people think that it is not advisable to operate on a rainy day. It is okay not to let off wind for 1-2 days. However, it is easy to have various problems if there is continuous rain and rain for many days. It is advisable to perform appropriate air release operations in a timely manner according to the weather conditions.

After 2-3 days of continuous rainy days, select no rain at noon for a short period of time (15-30 minutes is appropriate). Open the air vents appropriately to perform dehumidification (mainly open the top air vent) and air exchange (open the top air vent and waist air vent. ). Continuous rain, the air in the closed facility is completely oversaturated for 2-3 days, and once the outside world stops raining, the humidity of the air flowing outside is smaller than the air humidity in the facility, so the ventilation management is helpful to reduce the humidity and air exchange in the facility. Conducive to the growth of seedlings.

Disclaimer: Some articles on this website are transferred from the Internet. If you have third party legal rights, please inform this website to deal with them. phone

Plant Growth Regulator

Natural Field strives to develop low toxicity and environmentally friendly agricultural raw materials. They are popular in Europe and North America. We are proud of us: 5-ala, Physcion, Genistein and Triacontanol Etc.


Eg:1. 5-ala: 5-ALA (CAS: 5451-09-2) is suitable for a wide range of scientific fields, such as increasing harvest yield or increasing plant green. Supplementary studies from animal cultures of

2.Physcion emodin methyl ether is extremely toxic to humans and animals, environmentally friendly, and is especially suitable for biological preparations for green and organic vegetable production, as the Plant Growth Regulator Powder.

Plant Growth Regulator,Plant Growth Regulator Powder,Plant Growth Regulator Extract,Plant Growth Regulator Raw Material

Xi'an Natural Field Bio-Technique Co., Ltd. , https://www.naturalnf.com