Food vacuum packaging machine steps

With the arrival of summer, the prevention of food has become a hot issue. How to achieve safe and effective packaging without affecting the original taste and nutritional value has become an important issue for Zui. The application of food vacuum packaging equipment in the market solves this technical problem, integrates advanced vacuuming technology into food packaging, and achieves the effect of quality extension by improving the vacuum inside the packaging bag. The food vacuum machine has a short working time, the process is simple and easy to understand, and the automation is high. The entire workflow can be completed with simple guidance.

The working steps of the food vacuum packaging machine are mainly divided into: the process of turning on the power of the machine, putting the package into the vacuum chamber, and heat sealing.

1. Turn on the machine. According to the power supply requirements of the vacuum packaging machine, the relevant power selection switch is dialed, and the vacuum sealing process is indicated when the switch is directed to the vacuum, and the vacuum inflation sealing process is directed to the vacuum inflation.

2. Put the package containing the food into a vacuum chamber and vacuum pack it. Close the lid of the vacuum chamber, after the indicator light on the operation panel becomes bright, the vacuum pump draws vacuum according to the preset vacuum degree. After the set value is reached, the vacuuming process ends, the indicator light goes out, and then enters the heat seal (inflated). )stage.

3. After the bag is inflated, the package is heat-sealed. It is necessary to pay attention to the use of special packaging materials. The heat sealing time is preset. When the working time is reached, the indicator light is extinguished and the heat sealing operation ends. The heat sealing process not only can seal the bag better, but also can be thermally sterilized. The next step of zui is cooling under vacuum and cooling according to the set cooling number.

Spacer & Bushing

Spacer and Bushing

The Spacers are designed to hold materials a predetermined distance away from the surface they are mounted to, or mount two items a set distance apart. Sizes and materials vary depending on intended use.

The Bushings are used as spacers between pulleys and gears to prevent damage caused by vibration and dynamic loads. The durable bushing material is corrosion resistant.

The material of Spacer Bushing including carbon steel, Stainless Steel, Aluminum and Brass. Dimensions are according to custom made. The zinc-plated finish provides some corrosion resistance.

APPLICATION



Spacer & Bushing,Spacer Bushing,Shaft Spacer, Bushing Spacer

Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com