Film impact tester use method
The film impact tester performs various test standards such as GB/T 8809-2015, ASTM D3420, and NF T54, and is suitable for accurate measurement of pendulum impact resistance of plastic film, sheet, composite film, metal foil, paper, cardboard, etc. . ZJM-06 is a new generation of electronic film impact tester of Sanquan Zhongshi, which realizes the automatic and electronic measurement of the impact resistance of the film. The operation of the device is simple and convenient. The user only needs to complete the balance adjustment of the device and the simple setting of the test parameters. The sample is clamped onto the pneumatic fixture and the test is automatically completed by clicking “Testâ€.
In order to facilitate everyone familiar with the testing machine, below, Sanquan Zhongshi engineers briefly introduce the test operation method of the film impact tester ZJM-06:
(1) Sample preparation, except as otherwise specified in the sample requirements, the sample shall be pretreated and sampled according to the provisions of GB/T2918 before the test.
(2) Determine the test method A method or B method, or user-defined experimental method.
(3) Connect the instrument power cord and turn on the power.
(4) Reliably connect the instrument pneumatic joint with the user's air source with the supplied air pipe, open the air source, and adjust the air source pressure to 0.6~0.8MPa.
(5) Adjust the four leveling feet clockwise or counterclockwise until the level horizontal bubble is in the middle position.
(6) Perform balance adjustment and system verification.
(7) Enter the parameter setting interface and set the corresponding parameters of the test.
(8) Hold the sample, test the impact, and select the appropriate pendulum range.
(9) Start the test.
(10) At the end of the test, the test results are displayed and the test report can be printed.
Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd. (registered brand: Sumspring Sanquan Zhongshi) is a high-tech innovative enterprise specializing in the research and development and sales of laboratory analytical instruments. The company was established in 2007 and specializes in quality inspection and drug inspection systems. The food industry, pharmaceutical industry, packaging and printing industry, adhesive industry, home appliance industry, etc. provide packaging materials scientific testing instruments and comprehensive quality control solutions.
Ventilation is one of the most important components in a successful greenhouse.
If there is no proper ventilation, greenhouses and their growing plants can become prone to problems. The main purposes of ventilation are to regulate the temperature and humidity to the optimal level, and to ensure movement of air and thus prevent build-up of plant pathogens (such as Botrytis cinerea) that prefer still air conditions. Ventilation also ensures a supply of fresh air for photosynthesis and plant respiration, and may enable important pollinators to access the greenhouse crop.
Greenhouse Circulation Fan,Greenhouse Ventilation Fan,Automated Greenhouse Ventilation Fan
JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.skyplantgreenhouse.com