Electric brush type automatic cleaning filter with backwash?

Electric brush type automatic cleaning filter with backwashing? When the water flows through the filter, the mechanical impurities in the water are intercepted by the filter net. When the surface area of ​​the filter increases the impurity and the pressure difference reaches 0.05MPA, the differential pressure type differential pressure The switch sends out the signal, and the PLC sends out the command, the drive motor starts, the blowdown valve opens, the impurities deposited in the filter screen are swept by the rotating brush, and are discharged from the drain outlet. The entire scrubbing and discharging process does not require personnel to operate, and no downtime is required. The equipment also has regular cleaning and sewage discharge and manual cleaning and sewage discharge function to ensure automatic cleaning of the filter screen and automatic sewage discharge under the condition of any situation, and truly realize unattended duty.

Electric brush type automatic cleaning filter with backwashing summary:

The self-cleaning filter is a new type of water filter developed by the company with reference to foreign advanced technology. It is compact in structure, small in floor space and convenient to use. It is an efficient mechatronic automatic filtering device. It adopts advanced intelligent control technology, and the system parameters are easy to adjust and the cleaning effect is intuitive. In the steel, chemical, power generation, heating, central air conditioning and other industries (especially in many industries with harsh water quality), the filtration effect will be related to next year, reliable long-term operation (24-hour continuous operation without shutdown system), water-saving and electricity-saving The irreplaceable advantages can filter out various mechanical impurities in the water to ensure safe and reliable operation of the system equipment.

Electric brush type automatic cleaning filter with backwashing equipment mechanism and working principle

The self-cleaning filter is mainly composed of a high-quality carbon steel cylinder, a special-structure stainless steel wedge filter, a sewage part, a transmission device and an electric control part. When the filter is working, the water to be filtered enters through the water inlet, flows through the filter screen, enters the pipeline required by the user through the outlet for industrial circulation, and the particulate impurities in the water are trapped inside the filter screen. With such continuous circulation, more and more particles are cut off, the filtration speed is getting slower and slower, and the imported sewage is continuously entering, and the filter holes will become smaller and smaller, thereby generating pressure between the inlet and outlet. Poor, when the differential pressure reaches the set value, the differential pressure transmitter transmits an electrical signal to the controller, and the controller activates the drive motor to drive the shaft to rotate through the transmission assembly, while the sewage outlet opens, is discharged by the sewage outlet, and is cleaned by the filter After the completion, the pressure difference drops to the minimum value, the system returns to the initial filtering state, and the system runs normally.

Technical Parameters

1, working pressure: 0.6-2.0Mpa

2, system pressure loss: 30-50Kpa

3, working temperature: 2-95 ° C

4, motor power: 0.15-0.55Kw

5, power supply voltage: 220V ± 5%

6, filter aperture: 50-1000μm

7, flushing time: backwashing single cycle process about 23 seconds

The electric brush type automatic cleaning filter has the internal structure of bristle brush or stainless steel wire brush and stainless steel strainer and transmission parts. The drive motor and electric valve automatically complete the cleaning and discharging, and the operation mode is automatic operation (can also be manually operated). , with differential pressure or timed automatic sewage discharge function.