Daily maintenance of the dryer

In the daily operation of the dryer, it is inevitable that some problems will be encountered. These problems are easily solved as long as the operator has mastered the maintenance skills. Below, Wanxi Machinery will introduce some commonly used dryer troubleshooting methods.

The first problem is that the dried material does not meet the specified moisture requirements. The easiest way to solve this situation is to first control the production capacity of the dryer equipment and then increase or decrease the amount of heat supplied.

The second problem is that the rolling ring has a swinging effect on the running of the cylinder. This phenomenon occurs because the side of the concave joint of the rolling ring is not tightened. The solution is to just tighten it slightly, and the attention should not be too tight, too tight. It is easy to have an accident.

The third problem is that the gap between the large gear and the pinion of the dryer is destroyed. There are generally three reasons for this. One is that the roller is worn, the other is that the wheel is worn, and the third is that the pinion is worn. . The solution to this situation is to first analyze whether the wear is serious. If it is serious, replace it. If it is not serious, just turn it off. You can also install it on the reverse side. If you are afraid of instability, you can pair it. Replace with a new one.

The last problem is the vibration of the barrel of the dryer. There are two reasons for this. The first one is that the equipment of the equipment and the base are broken. If this is the case, just The correction can be reinforced; the second is the wear on the side of the raceway. The way to solve this glitch is to wear it according to its wear and tear. If it is not serious, it only needs to be turned. If it is serious, replace the parts.

At the same time that the dryer is widely used, people pay more and more attention to the maintenance of the dryer. Wanxi Machinery reminds relevant enterprises to improve the professional skills of the repair personnel. Only the maintenance workers and operators have improved their technical business level. The quality of the overhaul will only improve.

Fresh Double Packed Sweet Corn

Jilin Province Agricultural Sister-in-law Food Co., Ltd. was establishe in 2012, is a diversified company based on corn food's research and development, production, and sales. Through several years' rapid development and innovation, Nongsao gradually became a modern company of certain scale.

Jilin Province Agricultural Sister-in-law Food Co., Ltd. is located in Gongzhuling City, Jilin Province, one of the three golden corn belts in the world. The corn belt in Jilin Province is well suited for corn growing conditions, and more than 60% of the arable land is suitable for corn growing, so the total corn production and commercial grain rate in Jilin Province has been the first in China. Jilin Province is the main corn producing region in China and the main grain exporting province of the country.
Unlike other regions, Jilin has a cold-temperate humid and semi-humid climate. The frost-free period is short throughout the year, about 130-170 days, and the annual precipitation reaches 400-800. July-September is the peak period of precipitation, which is more suitable.

If you have any questions, please contact us directly. Welcome to visit our factory, if you have any questions, please email us directly.

Local Sweet Corn,Sweet Corn For Diet,Sweet Maize Cob,Packed Sweet Corn

Jilin Province Argricultural Sister-in-law Food Co., Ltd. , https://www.nongsaocorns.com