Common troubleshooting of belt filter presses
First, the belt filter press common troubleshooting
1. Supporting bearing failure at both ends of the tensioning roller, it is necessary to strengthen the bearing inspection and maintenance during operation;
2, the upper and lower rollers are not synchronized, easy to appear in the tension cylinder failure, synchronous gear wear (especially the use of plastic material synchronous gear), need to strengthen the synchronization gear, tension cylinder and its attached pneumatic pipe inspection
3, the tension bar offset, mainly occurs when the tension bar bushing is excessively worn or detached, it is necessary to regularly check the bushing wear degree, and arrange maintenance and replacement in time;
4. Roller surface accuracy problem. The accuracy of roundness and coaxiality of the tensioning roller should be checked before installation. The tolerance value is the same as above.
Second, the conclusion
There are many variables that affect the effect of the belt filter press, and the causes of equipment failure are also complicated. It may be the result of a fault that may be the result of multiple faults. In the operation management, the belt filter press is found. In case of failure, the current operation status of the belt filter press and the management data should be checked from easy to difficult to prevent the fault from further expanding. The above article is for reference only.
Installing Bullet Solar Camera
1. Understand how solar monitoring works
The solar Security Camera mainly relies on its attached solar panel to convert the solar light into electricity and charge the built-in battery for monitoring. The integrated inverter in the monitoring can also convert the DC power from the solar panel to AC power, so as to provide power when the sun comes out. It is stored in its rechargeable battery during the day, and its power can maintain the continuous work of solar monitoring at night.
2. What are the advantages of solar monitoring over ordinary monitoring
Unlike wired common monitoring, it does not need to run wires to connect it to the power supply. They connect to the home safety system via a Wi Fi connection rather than a data cable. As a result, they are true wireless security solutions that are easier to install. With wired cameras, you need to place them on the wall where the power cord runs, or close to the wall outlet. In contrast, you can install additional solar monitoring anywhere, even if there is no outlet nearby.
3. Which functions are necessary in solar monitoring
Camera resolution, field of view, solar panel wattage, night vision, motion activation, remote monitoring and smartphone alarm. The resolution of the camera determines the sharpness of the monitored safety picture. Look for models with High Definition (HD) cameras or better. The field of view describes the coverage of the camera. Security monitoring with a wider view is always better. Night vision and motion activation indicate whether the camera can see at night and start recording when it detects motion in the coverage area. The wattage of the solar panel paired with the security camera indicates how much power it can generate from sunlight. The battery panel with higher wattage can charge the attached battery faster and provide more power for monitoring. Smartphone alerts and remote monitoring are designed to help you monitor your home or office in the absence.
4. Whether the sun monitoring can continue to work in cloudy days
The answer is yes. The solar panels connected to the solar monitoring system generate less power in cloudy and rainy days, but the excess power stored in rechargeable batteries in sunny days can help them survive rainy and cloudy days.
Bullet Solar Camera,PIR Auto Tracking PTZ Camera,PTZ Camera for Mobile Phone,Solar Camera 1080P
Shenzhen Fuvision Electronics Co., Ltd. , https://www.outdoorsolarcameras.com